 |
 |
 |
|
Page
1 of 11
|
| Section 7 describes how to manually program the 5700 control panel from the built-in or remote annunciators. Each Program Menu option is described in detail. All options described in this section can be performed using the Silent Knight Software Suite 5660. |
|
IMPORTANT!
|
|
Before
any customized programming is done, JumpStart should be run first. After
JumpStart is run, thoroughly test the system. The reason the system
should be tested after JumpStart is because JumpStart automatically
programs the system, searching for and configuring all SLC and SBUS
devices it finds. JumpStart allows you to confirm the integrity of the
installation prior to performing any custom programming. After determining
that the hardware is properly installed, custom programming can be performed.
|
Programming Menu Options Overview
The following pages of this section will break down the programming menu options in detail.
