 |
 |
 |
|
Page
1 of 16
|
| This section lists devices (smoke detectors and notification appliances that are compatible with the SK-5208. Contact Silent Knight if you have a question about whether a device not listed here is compatible. This section is for reference only. The following pages list each manufacturer and their devices that are known to be compatible with the SK-5208. |
|
NOTE
|
The maximum number of smoke detectors per zone is determined by both the current draw and the impedance of the smoke detector. If too many smoke detectors are used on any zone, false alarms could occur. Do not mix different models of detectors on any zone; false alarms could occur. Control unit Smoke Reset Time must be programmed for a number greater than or equal to the mazimium reset time of the smoke detector. |
|
SK-5208
|
SK-5217
|
|
|
Identifier
|
24J
|
24J
|
|
Maximum
Voltage
|
27.4
VDC
|
27.4
VDC
|
Place your mouse cursor over the device button below to view and navigate to the manufacturers devices that are compatible with the SK-5208.
|
|
|
|
|
Page
1 of 16
|