 |
 |
 |
|
Page
2 of 10
|
Acknowledge Operation
Events can
be acknowledged by pressing the 
button. No code is required to acknowledge events. The status LEDs (Alarm,
Supervisory and Trouble) will flash when an un-acknowledged alarm, supervisory,
or trouble condition exists.
After each event has been acknowledged its associated LED (Alarm, Supervisory, or Trouble LED) will stop flashing and turn on steady. When viewing system status the LCD displays “Acked” for each individual event once it has been acknowledged. The control panel piezo will silence after all alarms have been acknowledged.
|
NOTE
|
The control panel piezo will continue to sound for Supervisories and Troubles even after the event has been acknowledged. Supervisories and troubles will silence one the event is restored. |
After the event is acknowledged
an event is added to the event history buffer. Acknowledged events in the
history buffer will be preceded with an asterisk “*”.
LED Indicators
Five light emitting diodes (LEDs) appear in the SK-5208 built in annunciator and SK-5235 remote annunciator. Clicking the LED status below will explain the meaning of these LEDs.
 |
|
|
|
|
|
|
|
 |
|
||||||
 |
 |
 |
 |
|
|||
 |
 |
 |
|
||||
 |
|
||||||
 |
|
||||||
 |
 |
|
|||||
 |
|
||||||
 |
|
||||||
 |
 |
|
|||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
 |
|
|||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
 |
|
|||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||
 |
|
||||||