Skip Ribbon Commands
Skip to main content

Wireless (SWIFT)

Product Page Dynamic Content
Silent Knight offers addressable plug-in photoelectric and thermal detectors that use a state-of-the art technology with communications to provide open area protection that are used exclusively with Silent Knight’s Addressable Fire Alarm Control Panels (FACPs).
SWIFT wireless addressable devices provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a class A mesh network. Great for applications where it is costly, obtrusive, or possibly dangerous to use traditional wired devices.
Addressable fire alarm control panels that vary in size and capability to meet a wide range of needs, while offering superior value and flexibility.
Silent Knight offers several options of communicators that interface with fire alarm control panels (FACPs) and transmitters that are designed for a variety of fire and non-fire applications.
Silent Knight offers a variety of annunciators that mimic the fire alarm control panel and provide system status indicators to support different installation requirements.
Silent Knight addressable panels provide a 4-conductor circuit called the SBUS (Serial Bus) that connects specific addressable modules. These modules include: signal line circuit expanders, power modules, interface cards, fiber optic modules and more.

WSK-WGI Wireless Gateway

WSK-WGI is the wireless fire system gateway that acts as a bridge between the fire alarm control panel (FACP) and wireless fire devices. The wireless gateway uses mesh technology to communicate with the devices and offers high reliability for commercial applications. The WSK-WGI can be installed anywhere on the SLC and is an excellent solution for retrofits and “hard to wire” applications. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.
<div>&nbsp;</div><div class="productdocdivs"><a href="http://www.silentknight.com/CatalogDocuments/351618_Datasheet_WSK-WGI.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="http://www.silentknight.com/CatalogDocuments/LS10036-000SK-E_Manual_SWIFT.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="http://www.silentknight.com/Pages/Product.aspx?category=SWIFT%20Wireless%20Detection&cat=HFS-SILENTKNIGHT&pid=W-GATE">Learn more</a></div><br/>
WSK-WGI is the wireless fire system gateway that acts as a bridge between the fire alarm control panel (FACP) and wireless fire devices. The wireless gateway uses mesh technology to communicate with the devices and offers high reliability for commercial applications. The WSK-WGI can be installed anywhere on the SLC and is an excellent solution for retrofits and “hard to wire” applications. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.
 

WSK-PHOTO / WSK-PHOTO-T Wireless Photoelectric Smoke Detectors

WSK-PHOTO and WSK-PHOTO-T addressable, wireless photoelectric detectors use a state of the art photoelectric sensing chamber to provide open area protection. The WSK-PHOTO-T adds thermal sensors that will alarm at a fixed temperature of 135⁰F (57⁰C). The WSK-PHOTO and WSK-PHOTO-T communicate with the fire alarm control panel (FACP) through a wireless mesh network to the WSK-WGI wireless gateway. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.
<div class="productdocdivs"><a href="/CatalogDocuments/351614_Datasheet_WSK-HEAT.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="/CatalogDocuments/LS10036-000SK-E_Manual_SWIFT.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="/Pages/Product.aspx?category=SWIFT%20Wireless%20Detection&cat=HFS-SILENTKNIGHT&pid=WSK-PHOTO">Learn more</a></div><br/>
WSK-PHOTO and WSK-PHOTO-T addressable, wireless photoelectric detectors use a state of the art photoelectric sensing chamber to provide open area protection. The WSK-PHOTO-T adds thermal sensors that will alarm at a fixed temperature of 135⁰F (57⁰C). The WSK-PHOTO and WSK-PHOTO-T communicate with the fire alarm control panel (FACP) through a wireless mesh network to the WSK-WGI wireless gateway. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.

WSK-HEAT / WSK-HEAT-ROR Wireless Heat Detectors

WSK-HEAT and WSK-HEAT-ROR addressable, wireless heat detectors use a state-of-the-art thermistor sensing circuit for a fast response. The WSK-HEAT provides fixed temperature alarm detection at 135°F. The WSK-HEAT-ROR provide Rate-of-Rise Detection at 15⁰F/min. The WSK-HEAT and WSK-HEAT-ROR communicate with the fire alarm control panel (FACP) through a wireless mesh network to the WSK-WGI wireless gateway. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.
<div class="productdocdivs"><a href="/CatalogDocuments/351614_Datasheet_WSK-HEAT.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="/CatalogDocuments/LS10036-000SK-E_Manual_SWIFT.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="/Pages/Product.aspx?category=SWIFT%20Wireless%20Detection&cat=HFS-SILENTKNIGHT&pid=WSK-HEAT">Learn more</a></div><br/>
WSK-HEAT and WSK-HEAT-ROR addressable, wireless heat detectors use a state-of-the-art thermistor sensing circuit for a fast response. The WSK-HEAT provides fixed temperature alarm detection at 135°F. The WSK-HEAT-ROR provide Rate-of-Rise Detection at 15⁰F/min. The WSK-HEAT and WSK-HEAT-ROR communicate with the fire alarm control panel (FACP) through a wireless mesh network to the WSK-WGI wireless gateway. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.

WSK-MONITOR Addressable Monitor Module

WSK-MONITOR addressable, wireless monitor module is a standard-sized module that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. It can be used for a variety of applications, such as monitoring conventional pull stations. This module is designed to supervise a circuit of dry-contact input devices on the fire alarm control panel (FACP). The WSK-MONITOR communicates with the FACP through a wireless mesh network to the WSK-WGI wireless gateway. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.
<div class="productdocdivs"><a href="/CatalogDocuments/351616_Datasheet_SK%20SWIFT%20Modules.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="/CatalogDocuments/LS10036-000SK-E_Manual_SWIFT.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="/Pages/Product.aspx?category=SWIFT%20Wireless%20Detection&cat=HFS-SILENTKNIGHT&pid=WSK-MONITOR">Learn more</a></div><br/>
WSK-MONITOR addressable, wireless monitor module is a standard-sized module that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. It can be used for a variety of applications, such as monitoring conventional pull stations. This module is designed to supervise a circuit of dry-contact input devices on the fire alarm control panel (FACP). The WSK-MONITOR communicates with the FACP through a wireless mesh network to the WSK-WGI wireless gateway. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.

WSK-RELAY Addressable Relay Module

The WSK-RELAY Addressable Wireless Relay Module is a wireless relay module is a standard-sized module that allows the fire alarm control panel (FACP) to switch discrete contacts. The relay contains an isolated set of Form-C contacts, which operate as a SPDT switch. The relay module can be used to activate functions such as a remote power supply (in conjunction with a monitor module), elevator recall, door holders and fan shutdown of wired devices or SWIFT devices within the same mesh network.  Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.
<div class="productdocdivs"><a href="/CatalogDocuments/351616_Datasheet_SK%20Modules.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="/CatalogDocuments/LS10036-000SK-E_Manual_SWIFT.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="/Pages/Product.aspx?category=SWIFT%20Wireless%20Detection&cat=HFS-SILENTKNIGHT&pid=WSK-RELAY">Learn more</a></div><br/>
The WSK-RELAY Addressable Wireless Relay Module is a wireless relay module is a standard-sized module that allows the fire alarm control panel (FACP) to switch discrete contacts. The relay contains an isolated set of Form-C contacts, which operate as a SPDT switch. The relay module can be used to activate functions such as a remote power supply (in conjunction with a monitor module), elevator recall, door holders and fan shutdown of wired devices or SWIFT devices within the same mesh network. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.

W-USB SWIFT Tools

W-USB SWIFT Tools can be used to conduct a site survey or to interface with all addressable wireless devices allowing for faster and easier configuration.  It also provides current information on all devices within the Class A mesh when a PC is within range of the SWIFT WSK-WGI Wireless Gateway.
W-USB SWIFT Tools can be used to conduct a site survey or to interface with all addressable wireless devices allowing for faster and easier configuration. It also provides current information on all devices within the Class A mesh when a PC is within range of the SWIFT WSK-WGI Wireless Gateway.
​ ​