Skip Ribbon Commands
Skip to main content

Addressable SD SLC Devices

Product Page Dynamic Content
Silent Knight offers addressable plug-in photoelectric and thermal detectors that use a state-of-the art technology with communications to provide open area protection that are used exclusively with Silent Knight’s Addressable Fire Alarm Control Panels (FACPs).
SWIFT wireless addressable devices provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a class A mesh network. Great for applications where it is costly, obtrusive, or possibly dangerous to use traditional wired devices.
Addressable fire alarm control panels that vary in size and capability to meet a wide range of needs, while offering superior value and flexibility.
Silent Knight offers several options of communicators that interface with fire alarm control panels (FACPs) and transmitters that are designed for a variety of fire and non-fire applications.
Silent Knight offers a variety of annunciators that mimic the fire alarm control panel and provide system status indicators to support different installation requirements.
Silent Knight addressable panels provide a 4-conductor circuit called the SBUS (Serial Bus) that connects specific addressable modules. These modules include: signal line circuit expanders, power modules, interface cards, fiber optic modules and more.

SD500-AIM Addressable Input Module

The SD500-AIM is an addressable input module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations.  The SD500-AIM mounts to a 4”-square box.
The SD500-AIM is an addressable input module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations. The SD500-AIM mounts to a 4”-square box.

SD500-MIM Addressable Mini-Input Module

The SD500-MIM is an addressable mini-input module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations.  Due to its small size the SD500-MIM can be mounted in a single gang junction box directly behind the monitored device.
The SD500-MIM is an addressable mini-input module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations. Due to its small size the SD500-MIM can be mounted in a single gang junction box directly behind the monitored device.

SD500-ANM Addressable Notification Module

The SD500-ANM is an addressable notification module and provides supervised monitoring of wiring to the load devices that require an external power supply to operate such as bells, horns, and strobes.
The SD500-ANM is an addressable notification module and provides supervised monitoring of wiring to the load devices that require an external power supply to operate such as bells, horns, and strobes.

SD500-ARM Addressable Relay Module

The SD500-ARM is an addressable relay module that allows an IntelliKnight fire alarm control to switch discrete contacts by code command.  The module contains two isolated sets of Form C contacts.
The SD500-ARM is an addressable relay module that allows an IntelliKnight fire alarm control to switch discrete contacts by code command. The module contains two isolated sets of Form C contacts.

SD500-LIM Line Isolation Module

The SD500-LIM is a line isolation module that acts as an automatic switch that opens when the line voltage on the signaling line circuit (SLC) loop is shorted.    The SD500-LIM mounts in a standard dual gang or 4” square electrical box.
The SD500-LIM is a line isolation module that acts as an automatic switch that opens when the line voltage on the signaling line circuit (SLC) loop is shorted. The SD500-LIM mounts in a standard dual gang or 4” square electrical box.

SD500-PS & SD500-PSDA Addressable Pull Station

The SD500-PSDA is a dual action pull station requiring two motions to activate the station.  The SD500-PS is a single action pull station requiring only one motion to activate the station.
The SD500-PSDA is a dual action pull station requiring two motions to activate the station. The SD500-PS is a single action pull station requiring only one motion to activate the station.

SD500-SDM Addressable Smoke Detector Module

The SD500-SDM is an addressable zone module that allows IntelliKnight fire alarm controls to interface and monitor two-wire conventional smoke detectors.
The SD500-SDM is an addressable zone module that allows IntelliKnight fire alarm controls to interface and monitor two-wire conventional smoke detectors.

SD505-HEAT Addressable Heat Sensor

The SD505-HEAT is an addressable fixed temperature heat sensor that uses a thermistor sensing circuit to produce an alarm when the temperature goes above the trip point programmed at the panel.
The SD505-HEAT is an addressable fixed temperature heat sensor that uses a thermistor sensing circuit to produce an alarm when the temperature goes above the trip point programmed at the panel.

SD505-PHOTO Addressable Photoelectric Smoke Detector

The SD505-PHOTO is an addressable photoelectric smoke detector suited to detect dense smoke from fire involving materials such as soft furnishings, plastic, foam or other similar materials which tend to smolder and produce large visible particles.
The SD505-PHOTO is an addressable photoelectric smoke detector suited to detect dense smoke from fire involving materials such as soft furnishings, plastic, foam or other similar materials which tend to smolder and produce large visible particles.

SD505-6IB 6" Isolation Base

The SD505-6IB is a 6” mounting base with a built-in isolator for SD series detectors.  The SD505-6IB prevents an entire communication loop from being disabled when a short circuit occurs.
The SD505-6IB is a 6” mounting base with a built-in isolator for SD series detectors. The SD505-6IB prevents an entire communication loop from being disabled when a short circuit occurs.

SD505-6RB 6" Relay Base

The SD505-6RB is a 6” plug-in detector relay base with a built-in form C relay for control of auxiliary functions such as elevator recall and door closure.
The SD505-6RB is a 6” plug-in detector relay base with a built-in form C relay for control of auxiliary functions such as elevator recall and door closure.

SD505-6SB 6" Sounder Base

The SD505-6SB is a 6” sounder base provides an audible output for the connected detector that is activated.  The SD505-6SB can be programmed for single or multi-station sounding.
The SD505-6SB is a 6” sounder base provides an audible output for the connected detector that is activated. The SD505-6SB can be programmed for single or multi-station sounding.

SD505-DUCT Addressable Duct Smoke Detector and Housing

The SD505-DUCT addressable duct smoke detector is a heavy duty detector housing with the SD505-APS addressable photoelectric smoke detector pre-installed and is used for detecting smoke and products of combustion present in air moving through HVAC air handling systems.
The SD505-DUCT addressable duct smoke detector is a heavy duty detector housing with the SD505-APS addressable photoelectric smoke detector pre-installed and is used for detecting smoke and products of combustion present in air moving through HVAC air handling systems.

SD505-DUCTR Addressable Duct Smoke Detector and Housing with Relay

The SD505-DUCTR addressable duct smoke detector with relay is a heavy duty detector housing with the SD505-APS addressable photoelectric smoke detector pre-installed and is used for detecting smoke and products of combustion present in air moving through HVAC air handling systems.  The built-in relay can turn off fans, blowers and other devices.
The SD505-DUCTR addressable duct smoke detector with relay is a heavy duty detector housing with the SD505-APS addressable photoelectric smoke detector pre-installed and is used for detecting smoke and products of combustion present in air moving through HVAC air handling systems. The built-in relay can turn off fans, blowers and other devices.

SD505-TCHB100 Handheld Detector Programmer

The SD505-TCHB100 was designed to program addresses of Hochiki detectors used with IntelliKnight fire alarm control panels.  Although this programmer is not required to program the detectors, many installers find it easy and more convenient than the standard empty base to the control panel programming method.
The SD505-TCHB100 was designed to program addresses of Hochiki detectors used with IntelliKnight fire alarm control panels. Although this programmer is not required to program the detectors, many installers find it easy and more convenient than the standard empty base to the control panel programming method.
​ ​