Skip Ribbon Commands
Skip to main content

SK Detectors

​​

SK-Acclimate Multi-Criteria Addressable Photoelectric Smoke Detector

The SK-ACCLIMATE Multi-criteria photoelectric smoke detector incorporates both thermal and photoelectric technologies that interact to maximize detection.  An on-board microprocessor with advanced software focuses on rejecting nuisance alarms.  Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The SK-ACCLIMATE Multi-criteria photoelectric smoke detector incorporates both thermal and photoelectric technologies that interact to maximize detection. An on-board microprocessor with advanced software focuses on rejecting nuisance alarms. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

SK-Beam & SK-Beam-T Addressable Beam Smoke Detector

The SK-BEAM and SK-BEAM-T are addressable beam smoke detectors uniquely suited for protecting open areas with high ceilings where other methods of smoke detection are difficult to install and maintain.  The SK-BEAM-T is equipped with an integral sensitivity test feature. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The SK-BEAM and SK-BEAM-T are addressable beam smoke detectors uniquely suited for protecting open areas with high ceilings where other methods of smoke detection are difficult to install and maintain. The SK-BEAM-T is equipped with an integral sensitivity test feature. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

SK-Duct Addressable Photoelectric Duct Detector

The SK-DUCT addressable duct smoke detector is used for detecting smoke and products of combustion present in air moving through HVAC air handling systems.  The duct housing allows for mounting of the SK-RELAY addressable relay module. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The SK-DUCT addressable duct smoke detector is used for detecting smoke and products of combustion present in air moving through HVAC air handling systems. The duct housing allows for mounting of the SK-RELAY addressable relay module. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

SK-FIRE-CO

The SK-FIRE-CO is an addressable combination fire and CO detector that can detect and send separate signals for fire and CO.  This multi-criteria detector uses four sensing technologies (photoelectric, infrared, heat, and CO) to accurately detect fire and CO alarm conditions with a high immunity to false alarms. When used with the B200S intelligent sounder base, the SK-FIRE-CO eliminates the need for multiple devices improving the aesthetics of the protected room and saving installation time and money.   Compatible with version 13 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The SK-FIRE-CO is an addressable combination fire and CO detector that can detect and send separate signals for fire and CO. This multi-criteria detector uses four sensing technologies (photoelectric, infrared, heat, and CO) to accurately detect fire and CO alarm conditions with a high immunity to false alarms. When used with the B200S intelligent sounder base, the SK-FIRE-CO eliminates the need for multiple devices improving the aesthetics of the protected room and saving installation time and money. Compatible with version 13 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

SK-Heat, SK-Heat-HT, SK-Heat-ROR Addressable Heat Detectors

The SK-HEAT, SK-HEAT-HT and SK-HEAT-ROR are addressable sensors that utilize a state of the art thermistor sensing circuit for fast response.  The SK-HEAT is a fixed temperature sensor that uses a thermistor sensing circuit to product a 135⁰F fixed temperature alarm.  The SK-HEAT-HT is a variable high temperature detector that provides high temperature detection at 135⁰F - 190⁰F.  The SK-HEAT-ROR is a rate-of-rise temperature sensor with 135⁰ fixed temperature alarm.  Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The SK-HEAT, SK-HEAT-HT and SK-HEAT-ROR are addressable sensors that utilize a state of the art thermistor sensing circuit for fast response. The SK-HEAT is a fixed temperature sensor that uses a thermistor sensing circuit to product a 135⁰F fixed temperature alarm. The SK-HEAT-HT is a variable high temperature detector that provides high temperature detection at 135⁰F - 190⁰F. The SK-HEAT-ROR is a rate-of-rise temperature sensor with 135⁰ fixed temperature alarm. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

SK-Photo & SK-Photo-T Addressable Photoelectric Smoke Detector

The SK-PHOTO is an addressable photoelectric smoke detector and the SK-PHOTO-T is an addressable photoelectric smoke detector with thermal detection.  The SK-PHOTOR is an addressable remote test capable photoelectric detector for use with the SK-DUCT.  Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The SK-PHOTO is an addressable photoelectric smoke detector and the SK-PHOTO-T is an addressable photoelectric smoke detector with thermal detection. The SK-PHOTOR is an addressable remote test capable photoelectric detector for use with the SK-DUCT. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

B224BI 6" Mounting Base with Built-in Isolator

The B224I is a 6” mounting base with a built-in isolator for SK series detectors.  The B224BI prevents an entire communication loop from being disabled when a short circuit occurs. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The B224I is a 6” mounting base with a built-in isolator for SK series detectors. The B224BI prevents an entire communication loop from being disabled when a short circuit occurs. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

B224RB 6" Mounting Base with Built-in Relay

The B224RB is a 6” plug-in detector relay base with a built-in form C relay for control of auxiliary functions such as elevator recall and door closure. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The B224RB is a 6” plug-in detector relay base with a built-in form C relay for control of auxiliary functions such as elevator recall and door closure. Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

B200S/B200S-LF 6” Intelligent Sounder Base

The B200S and B200S-LF are intelligent sounder bases that can generate various cadence patterns including a Temporal 3 pattern for fire alarm or a Temporal 4 pattern for CO alarm events.  The B200S-LF produces the 520 Hz low frequency tone that is required in sleeping areas as of January 1st, 2014.  The B200S and B200S-LF adopt the same address as the detector it is connected to allowing the FACP to use the address to command an individual sounder or a group of sounders to activate.  Compatible with version 13 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The B200S and B200S-LF are intelligent sounder bases that can generate various cadence patterns including a Temporal 3 pattern for fire alarm or a Temporal 4 pattern for CO alarm events. The B200S-LF produces the 520 Hz low frequency tone that is required in sleeping areas as of January 1st, 2014. The B200S and B200S-LF adopt the same address as the detector it is connected to allowing the FACP to use the address to command an individual sounder or a group of sounders to activate. Compatible with version 13 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

B200SR/B200SR-LF 6” Intelligent Sounder Base

The B200SR and B200SR-LF are sounder bases that can generate either a Temporal 3 pattern or a continuous tone by removing a jumper.  The B200SR-LF produces the 520 Hz low frequency tone that is required in sleeping areas as of January 1st, 2014.  The B200SR and B200SR-LF can be programmed for single or multi-station sounding.  Compatible for version 10 or higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.
The B200SR and B200SR-LF are sounder bases that can generate either a Temporal 3 pattern or a continuous tone by removing a jumper. The B200SR-LF produces the 520 Hz low frequency tone that is required in sleeping areas as of January 1st, 2014. The B200SR and B200SR-LF can be programmed for single or multi-station sounding. Compatible for version 10 or higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels.

B210LP 6" Mounting Base

B210LP 6" Mounting Base
B210LP 6" Mounting Base

B501 4" Mounting Base

The B501 4” mounting base and the B210LP 6” mounting base are plug in detector bases for SK style detectors.  These mounting bases have screw terminals for power (+) and (-) and remote annunciator connections.
The B501 4” mounting base and the B210LP 6” mounting base are plug in detector bases for SK style detectors. These mounting bases have screw terminals for power (+) and (-) and remote annunciator connections.